iPhone 5: 40nm Broadcom WiFi-Chip spart Strom, bringt Dual-Band WiFi, WiFi Direct und iOS AirDrop In den Tiefen eines iPhone 5 Kernel Dumps (ein komplettes Code-Abbild eines iPhone 5 Prototypen) finden sich einige interessante Details zur nächsten iPhone Generation.
So konnte 9to5Mac bereits Hinweise auf CPU, GPU und RAM-Größe finden.
Zu diesen Infos kommen jetzt neue WiFi-Details: Im Code wird mehrmals der Broadcom -Chip BCM4334 referenziert, der im Gegensatz zu Vorgänger BCM4330 (eingesetzt im iPad 3 und iPhone 4S) nicht mehr auf 65 nm Architektur basiert, sondern auf 40 nm „geschrumpft“ wurde.

Die Vorteile des neuen Chips liegen klar auf der Hand: Der BCM4334 benötigt im Betrieb nur noch 50-60 % der Energie seines Vorgängers, und einen um 3 Größenordnungen reduzierten Standby-Strom.

BCM4334 which is the follow-up part to BCM4330 that we've seen in a bunch of devices. BCM4334 changes from a 65nm process to 40nm LP, which itself offers a power profile reduction. The change isn't a simple die shrink either, says it has worked on and refined the existing BCM4330 design and reduced power a further 40-50% and dramatically reduced standby power by 3 orders of magnitude. I asked Broadcom to give me a realistic estimate of power consumption – BCM4330 in full Rx mode consumes around 68mA, BCM4334 consumes 36mA at the same voltage, just to give an example of the reduction. Air interfaces don't change between BCM4330 and BCM4334.

Hinzu kommen „Standard“-Features wie 4.0 und FM Radio, aber auch Neuheiten wie , und WiFi Display. Besonders praktisch für die Mac-Nutzer ist das (zumindest theoretisch mögliche) Nutzen von AirDrop, das Dual-Band WiFi voraussetzt.

The Broadcom BCM4334 single-chip dual-band combo chip provides a complete wireless connectivity system with ultra-low power consumption for mass market smartphone devices. Using advanced design techniques and 40nm process technology to reduce active and idle power, the BCM4334 is designed to address the needs of highly mobile devices that require minimal power consumption and compact size while delivering dual-band Wi-Fi connectivity.

The chip includes IEEE 802.11 a/b/g/n single-stream MAC/baseband/radio, Bluetooth 4.0 + HS, and an integrated FM radio receiver. It is designed to be used with external 2.4 GHz and 5 GHz front-end modules, which include power amplifiers, T/R switches and optional low noise amplifiers. The combo device also features advanced switching techniques that enable concurrent dual-band operation to simultaneously support network connectivity with one band while also allowing content streaming via technologies such as Wi-Fi Display and Wi-Fi Direct.

via, via