Bereits im Vorfeld der WWDC 2012 Keynote waren Gerüchte um ein neues mit im Umlauf. In Sachen Hersteller war die Rede von Focxonn, Sharp und anderen.
Mit dem neuesten Teardown klärte so einiges über das Innenleben des neuesten Retina Displays auf – mit einem überraschenden neuen Hersteller im Bild.

MacBook Pro: Unerwarteter Retina Display Hersteller

Es handelt sich um ein kleines Technik-Wunderwerk – so das Fazit von iFixIt:

The Retina display is an engineering marvel. Its LCD is essentially the entire display assembly. Rather than sandwich an LCD panel between a back case and a piece of glass in front, Apple used the aluminum case itself as the frame for the LCD panel and used the LCD as the front glass. They've managed to pack five times as many pixels as the last model in a display that's actually a fraction of a millimeter thinner. And since there's no front glass, glare is much less of an issue.

Das neuartige LC Display (LCD) ist nicht wie üblich zwischen einer Front-Glasplatte und einer hinteren Hülle verpackt, sondern direkt ins Alu-Gehäuse des neuen MacBook Pro integriert, und dient selbst als Front-Glas. Fünf mal so viele Pixel kommen hier in einem Display unter, das sogar minimal dünner ist als sein Vorgänger.
Der Wermutstropfen, der sich daraus ergibt: Das Display ist nicht austauschbar oder separat reparierbar.

Einige weitere Highlights aus dem :

* The Retina display is a hair over 7 mm at its thickest point and just over 3 mm at its thinnest, only a fraction of a millimeter thinner than the regular MacBook Pro.

* The display hinges have cables routed *through* them, without any means to remove the cables. So instead of routing cables underneath cable retainers (as in the non-Retina MacBook Pro), you just have to replace the cables and hinges together.

* The FaceTime HD camera interfaces with the rest of the computer via a Vimicro VC0358 USB camera interface IC.

* Underneath the top layer we find a series of films and sheets that manipulate light before sending it to the user's eye.

* A strip of 48 LEDs at the bottom of the display assembly provides all the light your Retina display needs.

* The bottom edge of the case has two features that we found pretty neat: a laser engraved internal use code and a nifty arrangement of round indentations.

Als Hersteller hat sich letztlich herausgestellt.

Markings on the inverter board read LP154WT1 (SJ) (A1) GD. This appears to be an LCD made by LG Philips!

Noch kann nicht ausgeschlossen, dass nicht auch Samsung oder Sharp (inkl. der neuen IGZO-Technologie) Retina Displays für das MacBook Pro herstellen. In diesem frühen Modell war es allerdings keiner der „üblichen Verdächtigen“.

Jede Menge Bilder und Detailinfos gibt es im Teardown-Artikel bei iFixIt.

via, via